Flood protection, equip with filter basket, hose and pump. Basement drainage.

QDX  series  submersible  motor  pump  is  mainly  composed  by  three  parts:  pump, mechanical seal and motor. Pump is at the bottom part of motor pump, which adopt centrifugal impeller. Motor is at the upper part of motor pump and it can be connected with  single-phase  asynchronous  motor  or  three-phase  motor.  Mechanical  seal  is between pump and motor, it's a  kind of double end mechanical seal, "O" rings are applied in all static joints of the submersible pump. Inner-installed protector prevents the pump from damages due to abnormal power, clog and overload etc.  

QDX  series  submersible  motor  pump  is  mainly  composed  by  three  parts:  pump, mechanical seal and motor. Pump is at the bottom part of motor pump, which adopt centrifugal impeller. Motor is at the upper part of motor pump and it can be connected with  single-phase  asynchronous  motor  or  three-phase  motor.  Mechanical  seal  is between pump and motor, it's a  kind of double end mechanical seal, "O" rings are applied in all static joints of the submersible pump. Inner-installed protector prevents the pump from damages due to abnormal power, clog and overload etc. 

SGP  series  stainless  steel  submersible  pumps  can  be  used  for  garden  watering, oxygenating of water cluster box or in supplying and draining Water for ordinary places and characterized by corrosion resistance, small volume, light weight and convenient  operation.  It  is  fitted  with  multiple  water-outlet  pipes,  and  self-regulated  according  to  the  requirements  of  its  lift  and  flow,  it  can  be  used  At  a deadlock (it is fitted with a floating switch, so it is possible to carry out automatic control of start-stop action under no one's care ) It's with single-phase capacitor A/C motor and with a thermal protector, it can be  cut-off automatically in the case of overheat or over-current, thus ensuring safe and reliable running under worse Circumstances.

SGPS series is an open Impeller centrifugal submersible drainage pumps. The Impeller mounted on the drive shaft,  consists of a back disk and lades. The fluid enters the rotating  blade  channel  via  the  strainer  where  it  moves  radially  from  the  centre outwards, acquiring energy both in the form of pressure and increased speed. When it leaves the impeller the fluid is conveyed into the volute. Here part of the kinetic energy is  transformed  into  pressure  energy  and  the  fluid  leaves  the  pump  via  the  vertical delivery opening in the pump body. Correct motor cooling is ensured pumped fluid.