Moldova ECOLINK SOLUTIONS AND VARIABLE SPEED PUMPS

The variable speed pumps adapt the water flow rate to the system requirements, allowing,consequently, the energy consumption control and a better management of the plant.
In terms of efficiency, there are several reasons why variable speed pumps are undoubtedly beneficial.

Synchronous permanent magnet motors with minimum efficiency IE4

The  Blulogica  variable  speed  pumps  are  built  with  permanent  magnet  motors  whose efficiency is significantly higher, IE4 at least, than the efficiency of the electric pumps that use standard squirrel cage induction motors (IE3 max in case of three-phase motors), so than, with the same working cycle, the absorbed power from a permanent magnet motor will be less than that the one absorbed by an induction motor.

Standard (IEC60034-30) Energy efficiency level for electric motors 2 poles 0,75Kw

The efficiency difference among a standard motor single-phase and one with permanent magnets can exceed 10%

Dynamic system management
Do to the centrifugal pumps operation principles a lower rotational speed leads to a reduction in power absorbed  by  the  network,  therefore,  adapting  the speed of the pump, through the ECOLINK system, to the functions required by the system, will allow the motor to absorb the minimum power necessary to provide  the  requested  service,  generatingsignificant energy savings.

Relationship between motor rpm and absorbed power P1 in centrifugal pumps